Metal Jacketed Gasket is based on 0.2-0.6
mm thick soft metallic strip which acts as the shell
material,filledwith non-nature fibre like graphite,asbestos or
ceramics.It often needs some certain shape rods when used in
heatexchanger.We can produce square,oval and other sort of shapes metal
jacketed gasket. According to their shellmaterial and filler
material,the maximum operating pressure and temperature are normally
from 6.0 to 10.OMPa and1000'C,respectively. The resilience for metal
jacketed gasket is low which is mainly depended on the materials.Buthigh
quality flanges with good surface and preload capability are
required.It is usually used for heat exchanger,pressure vessel and valve
flange, and so on. Two types of metal jacketed gaskets,they
areAT711Metal Jacketed Gasket,AT712Corrugated Metal Jacketed Gasket.
编号 | 名称 | 剖面 |
AT711 | 金属包覆垫片 | |
AT712 | 金属波形包覆垫片 | |
AT713 | 柔性石墨复合垫片 | |
AT714 | 强力垫片 |